Learn How to Program an RCA Universal Remote to a Roku

For using a universal remote learn how to program an RCA universal remote to a Roku. Program the remote to use it with the Roku. There are 4 ways of programming the remote and they are:

  • Branch code search
  • Direct Code Entry
  • Auto code search
  • Manual code search

How to program an RCA universal remote to a Roku
How to program an RCA universal remote to a Roku – using the Branch code search

  • Manually turn ON the Roku streaming media player
  • A Branch code list appears during the purchase of your RCA TV
  • Search for the code corresponding to the device
  • Use it to program the RCA universal remote
  • For each of the channel, find a corresponding code
  • Begin programming
  • Keep the remote pointed towards the IR sensor of your Roku player
  • Every time you finish the process for a specific function, the remote’s power key will blink four times and then turn OFF
  • Test the codes for maximum functionality after completion

Checking the functionality

  • Start checking different functionalities with the universal remote on your Roku player
  • If you find that certain features are not functioning, then you can try a different code from the Branch Code list
  • Never use the STOP key after programming a certain code
  • Instead, you can make use of the POWER key until the device turns back ON
  • However, you can make use of the STOP key once a certain code has been executed
  • Keep repeating the process until you find a Branch code that perfectly matches your Roku and gives you maximum functionality

How to program an RCA universal remote to a Roku – using the direct code entry

  • In the code list, identify the type of device (streaming media player)
  • Locate the brand of the device (Roku)
  • Long press any device key which you wish to program first
  • Now, while you are still holding on the first key, enter the 5-digit code corresponding to your device’s brand
  • Keep holding down the device key even after entering the code
  • And, simultaneously check if the POWER key in ON
  • If the POWER key is ON, then you have successfully programmed your universal remote using the Direct code entry
  • Else, you might have to repeat all the steps from the beginning

Using the above two techniques, you can now know how to program an RCA universal remote to a Roku. Visit rokucomlink.support or do not hesitate to call our backend experts for help @ +1-888-844-1380.